Table of Contents
As their name differ, there should be no surprise that the 13-amp circular is less powerful than the 15-amp one. The 15-ampere motor rotates faster and cuts larger materials easily and in bulk. In comparison, the 13-ampere motor can handle thinner materials that are smaller in size. A low-ampere circular saw is better for DIY tasks, but a 15-ampere saw is preferable for professional jobs. However, the settings in which they are employed will determine their similarities and differences. This instruction manual contains all you need to know about these saws.
In What Ways Are These Saws Identical?
- The fundamental components of each instrument are constructed almost the same. They are the right size without being too big, and each one only has one handle, which makes them easy to use even with one hand.
- These move about in a way that provides little difficulty in most situations. These are acceptable for a range of cutting operations. They come equipped with a selection of interchangeable blades, allowing the user to adapt the tool’s performance to the particular job.
- The circular blades on each of these saws have varying diameters, although it is possible to use the blades from one saw on the other in specific circumstances. Their blades have teeth, the number of which and their level of abrasiveness is modified counting on the task. Saws contain blade that moves in a similar direction, which enables them to rip timber from top to bottom.
How Do These Saws Different From Each Other?
Both saws can have their working ranges altered in several ways.
Cutting Dimensions Of Different Materials
In light of the ongoing discussion over saws, it is essential to consider the material you will be slicing before choosing between the two saws. Users who want to slice just little pieces of board that are less than a 2×4 should go for the more compact model (13-Amp). On the other hand, if you need something capable of handling more difficult cutting, a 15-ampere saw is ideal.
Cutting Capacity In-Depth
15-ampere saw is powerful, which is the fundamental difference between the two. The saw with a higher amperage rating can cut materials with a bigger diameter and a higher density (3.813 inches). If you have a model that operates at 15 amps at your home or place of work, you should have no issue cutting through them. A saw with a power rating of 13 amps and an angle of 90 degrees can cut a depth of up to 2-9/16 inches at its maximum size capacity.
Size
The motor in the 15-amp model is heavier than the motor in the other type; hence the saw is heavier overall. The saw with the lower amperage rating often has a lower mass than others. Because there are many different models from various manufacturers, the two saws will have different sizes and weights.
Price
The saw with 13 amps is the option that provides the most value for money compared to the other alternative. If you are dealing with a tight budget, consider this saw model.
Pros And Cons Of Both Saws
13-Ampere Circular Saw
Pros
- This specific saw variant has a lifespan normally longer than others.
- The manufacturing quality of these saws is excellent, which is one of the many reasons they are prevalent.
Cons
- It has limited power since it cannot cut through large sheets of wood or other materials.
- Utilizing it will only be manageable if you have knowledge or experience.
15 Amperes Circular Saw
Pros
- It easily slices through more extensive things.
- These machines are more suitable for messy situations due to their greater dirt-collection capabilities.
Cons
- These are priced more than the other variants that are offered.
- Some models feature smaller cords, which might make things more challenging for you while you are utilizing them.
When Choosing A Circular Saw, What Factors Should You Consider?
- The determination of power is the first aspect to take into consideration. Saws with lower power ratings are receiving less attention than saws with higher power ratings. It is due to the versatility of the work requirements from the higher amperes saws.
- Two distinctive choices are available in circular saws with and without a cord. Few of these saws run on batteries, while the rest need cables. It is dependent on the brand alternatives available. Because of this, before deciding which one is best for you, you need to weigh the possible advantages offered.
- The saws’ blades are also the tools’ most crucial component. Consequently, it will determine the sort of work you undertake. You will only be able to use a saw if the blade has the appropriate number of teeth attached to it required for the specific job.
FAQs
What Is The Standard Number Of Amperes For A Circular Saw?
These days, you may find a variety of saws on the market, each of which increases your output in its own unique way. At least 15 amps should be the standard for a circular saw. Less than that is not ideal for doing certain jobs.
How Robust Is A Table Saw That Only Uses 15 Amps?
When operating a table saw, 15 amperes is the ideal power. Using this saw, you can cut through a variety of tough materials.
Is There A Consequence If The Amp Is Greater?
If you use a high-powered tool like a circular saw at home, you may have trouble with the electricity. It can cause the voltage to drop or make it hard for other things to work. If you want to use heavy tools at home, you should have a good electrical wiring system.
How Can You Pick The Right Circular Saw?
Blades with multiple teeth make smoother, nicer cuts, while those with fewer teeth tend to make coarser ones. Cutting time and costs are reduced when fewer teeth are on the saw. An all-purpose blade with 24 teeth is enough for typical building tasks.
Conclusion
So, if you plan to work on larger projects and have thicker materials to cut, you should prefer the 15 amp model. However, as discussed earlier, the 13-amp will help you in many cases. If you need help use your circular saw to cut at various angles. Within the scope of this discussion, an excellent guide is available for you here to Cut 45-Degree Angles With a Circular Saw.