Dewalt Track Saw Review (DWS520K): Read This Guide Before Buying

Track saws have been available for a long time, but many carpenters have yet to adopt them. When most people hear the term “track saw,” they envision cutting down 4×8 sheets of plywood.

As a result, we’d want to spread the word about track saws, which are extremely versatile and time-saving tools. Recently, the three major tracks saw You might compare manufacturers. This Dewalt Track Saw Review will concentrate on the model DeWalt DWS520K.

CHECK LATEST PRICE →

Dewalt offers both corded and cordless TrackSaws. A 28V Lithium-Ion battery powers the cordless model. Although the tool is simple to set up and does an outstanding job of cutting, it truly shines when polishing. A 6.5″ blade with a 48T grind may not appear to be much, but keep in mind that it is just 6.5″ long. We’re talking about ultra-fine finishing blades, which are more than capable of producing incredibly clean finishing cuts.

When the blade is lowered from the housing, it cuts with amazing precision. You will see how the blade emerges from the housing and cuts through a rubber edge connected to the track. When utilizing the track for the first time, You must cut the rubber guide to match up with the blade properly. Allowing the saw to achieve maximum speed before diving allows you to cut through heavy material without bogging down. A spring-loaded riving knife is also situated behind the blade to prevent backlash. Finally, TrackSaw’s rotation and riving knife arrangement are similar to those of a table saw.

The track, which is quite light in weight, is made of aluminum. The 59-inch track was adequate for the task, but the 102-inch model would be preferable if you needed to cut a piece of plywood in half lengthwise. Dewalt also provides the option of connecting two tracks if necessary. A useful aspect of the DeWalt track system is the ease with which worn-out components, such as the Anti-splinter and Friction strips, and other components such as the Glide and Glide strips, which the saw goes over when cutting, may be replaced. In the long run, TrackSaw will save you a lot of time. You no longer need to carry the wood to a table saw or put up a 2×4 across plywood to get a straight cut with a circular saw.

The dust collection system on TrackSaw is fantastic. The saw has a swivel-capable universal 1-1/4″ dust port for clearing trash from your home. When attached to a standard shop vac, the TrackSaw produces nearly no dust. DEWALT advertises a dust extraction rate of 90%. However, I found it to be far higher.

DeWalt is, in our opinion, one of the safest track saws on the market right now. The saw’s base incorporates a riving knife and a revolutionary anti-kickback mechanism. If the saw starts to back up, the cam mechanism kicks in and grabs the rail in the middle of the track, reducing kickback.

• There is no need for splintering with zero clearance track saw cutting technology, which offers accurate and straight cuts.
• A power tool with a cord.
• Dual-edged track saw tracks are required for totally straight cuts in both directions.
• On-track cut depths are 2-1/8 (54mm) at 90 degrees and 1-5/8 (41mm) at 45 degrees.
• When computing the depth of cut on the depth scale, track thickness is considered.
• A 12A, 1300W engine can effortlessly cut hardwoods up to 2-1/8-inch thick.
• The riving knife and the Continuous Anti-Kickback mechanism avoid kickback when enabled.
• A low-profile blade guard is necessary to use the saw in restricted areas.
• A zero clearance track saw guarantees smooth, straight cuts with no splinters.
• Straight cuts in both directions are possible with dual-edged tracks.
• On-track cut depths are 2-1/8 (54mm) at 90 degrees and 1-5/8 (41mm) at 45 degrees.

Pros

• There was a lot of silence.
• A tremendous quantity of strength.
• A decent blade is included in the standard supply.
• A rather spacious case.
• Slicing is clean and precise.
• The craftsmanship is of the highest caliber.

Cons

• There is a little handle on the front.
• The balance is off when the saw is slanted more than 28 degrees.
• Competitively more costly.

What are the advantages of this saw over a normal circular saw?

A worm drive saw makes it easier to get into tight spaces since the motor’s centerline is parallel to the plane of the saw blade. Cross-Cutting sheet products are made easier with the increased distance between the handle and the blade.

What are the differences between the three models?

In the 520K model, there is only one saw. The 520SK has one 59-inch track, whereas the 520CK has two 59-inch and one 102-inch track.

Can a Dewalt track saw be used on Festool or Makita tracks?

You can use festool tracks with Dewalt track saws.

Is the motor equipped with “brakes”?

When you release the trigger, it comes to a complete stop.