Table of Contents
The space between a floor and a wall is filled by a wooden piece called a quarter round. You’ll need a miter gauge and a saw to do the job. Move the quarter-round piece inside the miter gauge to cut at a 45-degree angle, then cut it with a hand saw. You can also use a table saw to cut the quarter round. This article tells you everything you need to know about the same question in detail.
Cutting Quarter Round Without A Miter Saw – Use A Miter Box
As indicated before, a miter box is useful for precisely cutting quarter round. Using the box will do the work precisely. You must use the saw, and the wooden box with the miter saw purchased at any hardware store. You can cut the wood with the saw, and if you use the box as a guide, you can cut it at the appropriate angle.
-
Take Measurements
You need to accurately measure the wall and the floor space to which you will attach the quarter-round. Accurate measurements should be taken using inch tape or another measuring equipment of similar accuracy. If you are a newbie, it is recommended that you have a few extra pieces of these quarter rounds. In the future, you could make a mistake requiring you to use an extra one.
-
Making Angle
You must know that the two quarter-round pieces will join at a right angle. In this scenario, you will need to cut the block on each side at an angle of 45 degrees to connect and fill the gaps.
-
Cutting
Now, you should put the piece of wood inside the miter box and adjust the angle as required. After that, the pins are locked, stopping the component from moving around while it is being cut. To start gently cutting the quarter-round. Move the saw in a back-and-forth motion. When cutting the two portions, use the same method throughout. Please attach it to your wall in the appropriate manner.
Table Saw Instructions For Cutting Quarter Round
Utilizing such a saw is best for slicing the quarter round to size. Before making the angles, you should ensure the dimensions are precise by highlighting the quarter-round where you intend to cut.
- It is common practice to configure the table saw to slice at an angle of approximately 90 degrees. However, several models are also capable of cutting at different positions. YOu can use the table saw miter gauge for cutting at an angle of 45 degrees. Just install the gauge on the table.
- The saw’s blade level is often adjusted by a lever located nearby. Check the user manual if you can’t locate it. So place the quarter round on the table saw with the marks on it. And start cutting at 45-degree angles for both pieces with miter gauge assistance.
If you’re searching for a new table saw but are restricted by a tight budget, also considering that it is designed specifically for smaller shops. There are several excellent choices that we’ve included here.
Types Of Miter Box Suitable For The Task
There are several types of miter boxes. Anyone may obtain miter boxes at any tool shop, home improvement store, or online retailer.
- The molded plastic is the sort of box that is often accepted as an entrance option since it is inexpensive and simple.
- If users intend to put a significant amount of work into the miter box, they might consider investing in the contractor-grade version. A miter box for professional use would often be composed of polished metal and provide a larger range of angle options. Since it is quite robust and long-lasting, you may use it for many projects.
- A fine woodworking miter box is the best tool when operating on decorative items or sawing soft timber. Compact in size, this equipment is designed for materials that could be harmed by a blade or a spinning tool.
FAQs
Is There Anything That Can Replace Quarter-Round?
If the spaces around the floors and walls are tiny or aesthetics are your primary concern, shoe molding is better than quarter-round.
What About using Caulk In the Quarter Round?
Caulk used to place quarter rounds on borders is avoided due to its potential difficulty in removal in the event of further floor repairs. Since it won’t stick as well as adhesive, there are better options. Using nails, on the other hand, is a decent option. Caulk is used strictly for their intended purpose, which is to fill spaces.
What Is The Method Of Cutting A Quarter Round At An Angle Of 90 Degrees?
It’s very easy and simple. You will need to use a saw to make a clean cut on a quarter-round. Create a line in the center of the piece, and then cut it in a straight line.
How Big Is A Typical Quarter-Round?
Among the most prevalent molding styles is a quarter round. Its standard size is three and a half inches, filling the space created by the flooring expanding relative to the walls.
How About A Quarter-Round Nail It Or Glue It?
The quarter-round molding should be affixed directly to the floor and the borders. Its primary function is covering the seams between the floor and the foundation. Therefore, you may wish to change it in the future; thus, you should fix it with something other than glue.
Is It Difficult To Lay Quarter-Round?
Learning how to install a quarter-round to conceal the space where the end of the border and floor begins is an aesthetically pleasing alternative. It is cheap, simple, and quick to apply, making existing floors appear new.
Conclusion
You can utilize a miter Box, and a table saw to cut the angle at 45 degrees of a quarter round. So be specific while following the above-mentioned instruction to cut properly.