Wen Track Saw Review: Detailed Analysis of Track Saw

Wen, a well-known manufacturer of power equipment, produces track saws. Track saws excel at making straight cuts. A track saw is similar to a circular saw in some aspects. The spinning blade, for example, slices through materials like circular saws. You can use it one-handed or with both hands to cut your wood. Wen is a well-known manufacturer of power tools. This company’s products are of great quality and are designed to meet the needs of homeowners and do-it-yourselfers. In this article, we will look at the wen track saw review.

The Track Saw is a fantastic tool for anyone involved in construction, do-it-yourself, or basic carpentry.

If you’re just getting started in carpentry or furniture making, this is a useful tool to have on hand because it makes cutting sheets properly for your projects easier. We’ve done the research for you and discovered the best track saw on the market.

The WEN CT1065 is suitable for the casual or do-it-yourself woodworker, particularly beginners, because of its low price and high cutting speed. The WEN Track Saw, like the table or panel saw, is small and portable and can handle a variety of tasks.

CHECK LATEST PRICE →

A track saw with a powerful engine can easily perform carpentry chores. The Wen CT1065’s blade rotates at 5,500 revolutions per minute thanks to a 10-amp motor.

At these speeds, the saw can cut through various timbers, including hardwoods. Furthermore, the motor is powered by electricity. Although powerful enough for homeowners and DIYers, the 10-amp motor falls short of the 15-amp motor found in certain track saws.

When cutting wood, use the blade to cut at least 1 to 2 inches at every time interval. Despite this, it can cut through solid wood up to 2-1/3 inches thick.

The cuts are also clean and splinter-free. The powerful motor of the Wen CT1065 is meaningless if it is paired with a subpar blade. As a result, the Wen CT1065 track saw sports a 6.5-inch blade that can precisely cut through plywood and doors.

There are a total of 24 carbide-tipped teeth. The carbide edges improve the blade’s resistance and longevity. This blade can be used for internal plunge cuts, scoring cuts, and board tearing.

The saw’s powerful engine is no match for plywood or door trim. You can also use it to manufacture furniture. Wen CT1065 has a lot to offer in terms of cutting power. Furthermore, its 6.5-inch blade aids with plunge cuts.

The interoperability of the Wen CT1065 with other tracks is an advantage. Its tracks may be used by other Wen saws, such as the Wen CT 9502 100-inch track. Some track saws cannot be used with other track brands. As a result, a track-compatible model is a fantastic option for you.

This type includes a dust port. It collects all of the sawdust when attached to the saw. This is healthy for you, but it also saves you time when cleaning.

• Ripping boards up to 2-1/3 inch thick without splinters.
• This tool is ideal for tearing boards or creating plunge cuts within the board.
• You can use this tool to make internal plunge cuts.
• A carbide-tipped 165 mm (6.5 inches) blade with a 20 mm arbor is provided.
• Cut boards 1-5/8 inch thick with 45-degree bevels using the WEN CT 9502 100-Inch Track Saw Clamp and the WEN CT992F Track Saw Clamp.

Pros

• The six 5/8-inch base provides a lot of solidity when it comes to cutting material.
• A groove at the base of the saw blade allows it to glide smoothly on a saw track, reducing splintering at the end of your projects.
• It’s an excellent entry-level tool because of its low price and high adaptability for people just starting in woodworking.

Cons

• This plunge-cut saw has a comparatively low power output of around ten amps compared to other plunge-cut saws.
• Its levers and knobs, made of a lower-grade plastic, are prone to breaking and must be changed frequently.

“I’ve only used this saw a few times, but it’s already a champ! This knife can make straight and precise cuts. Because of the underlying foam insulation board, the cuts are nearly tear-free. The only thing this instrument lacks is a riving knife. Otherwise, I doubt you’ll be able to find a better system at this price.”

“Overall, the build quality is outstanding. To save money, plastic is used instead of metal on the knobs and adjustments, but if you treat it gently and do not abuse it, it will certainly outlast a more expensive model. I can still correctly dial in angles, saw depths, and other parameters despite my age.’

“In general, the saw represents good value for money. Because the bushings on the plunging hinge were so loose, I couldn’t tighten them. Straight 90-degree cuts, on the other hand, appear to be unaffected by this wobbling. I haven’t tried any other points of view yet. The adjustment knobs are composed of plastic, prone to breaking when subjected to heavy use or when dropped. Overall, Pretty Decent.”

How thick is the kerf on the given blade?

The company had just removed the calipers. 3/32″ is the normal blade width.

Is this saw compatible with Makita tracks?

This saw will fit on the Makita track.

Do you know the size of the dust collector’s inlet?

The taper increases to 1-1/2 inches at the end.

Is it simple to use for a left-handed person?

I believe it would work for a left-handed individual if saw clamps (WEN 36053C) were used to keep the track from shifting. It will be uncomfortable unless you do this. Again, this is just my personal opinion based on my right-handedness.