Table of Contents
The tool’s wear and tear is the most frequent cause of crooked cuts made by a chainsaw. The blades may deteriorate over time and compromise the saw’s operation. The Chain and the guide bar are also to blame in this case. However, finding the right answer to the issue requires considering several different factors. In this post, we’ve covered several potential causes of a chainsaw cut that isn’t straight.
What Causes A Chainsaw To Make A Crooked Cut – Causes And Fixes
-
Inadequate Blades
The common reason is that the blades are not sharpened equally, as every side of the blade needs perfect and equal sharpening. Users all times need help to perform the job adequately. That is why the blade cutting is not up to the mark. The issue arises when you sharpen the blade with the manual method, as there are more efficient methods to perform the job. People with a strong right hand often need to put more pressure on the other side of the chainsaw when they sharpen the blades.
So the most appropriate solution to this issue is to employ force equally on both sides when you sharpen the blades. If not possible, it is advised to sharpen the blades with a machine or tool specified for doing this job. A grinder is used to perform this job usually.
-
Depth Of Gauge
The gauge consists of tiny projections positioned ahead of the saw’s blade. They aid in specifying the deepness of the cut achieved by successive spins of the saw’s blade. There is usually a different standard for the saws you purchase from the market, so that the gauges may vary. These gauges are measured using an instrument. You can alter these gauges according to the needs of the work. So it will take care of the problem, and your saw will cut accurately.
-
Top Plate Issue
Make sure that all of the plates are the same dimension before using the saw so that you can get a clean cut. The teeth will only smash together consistently if the head plate is uniform. It is necessary to sharpen the top plate to guarantee that everything is secured. Sharpen the bigger plate until its size and shape are the same as the smaller plate. In addition, the angles must be consistent with one another so that nothing else is thrown off.
-
Bent Bar
The saw will only create precise cuts if the bar is balanced and formed properly. Before advancing to the cutting process, you must fix this issue.
The bar should be laid out on the level ground. Straightening out a crooked bar requires no special skills or tools. Smooth the crooked edge using a mallet and change the weight accordingly.
-
Teeth Wear And Tear
Over time, the slicing blades of a tool wear down and become rough, causing inconsistencies in the cutting’s quality. Sharpening is crucial since worn teeth cause subpar edges. A few options are available to you at this point. Start by ensuring the teeth are safe from hazards like gravel or stones. If not treated promptly, teeth might shatter and fall out. To resolve this issue, frequent tooth sharpening is necessary. However, if the issue is not remedied, chain replacement is required.
-
Other Problems
The chain’s condition is good, and the saw is regularly serviced. It may still be experiencing issues that necessitate replacing parts or seeking repair service. A blade is dull on one side if there is a problem with the dawg nut, i.e., protruding. It causes the chainsaw to begin skewed cutting. To solve this issue, one needs to get expert help.
The issue also occurs often if the chainsaw chain is not in a position or is off. You may use our additional work tutorial to put a chain back on a chainsaw.
Some Precautionary Measurements
- If the chain you are using does not cut as it should, you must cease using it and find a solution immediately.
- The continued use of irregular tools while operating a chainsaw can cause serious issues. Accidents may happen when people stop paying attention to their surroundings and equipment.
- Remember the chainsaw’s significant danger, and use it with the greatest caution. A dreadful occurrence might take place at any moment. Always use extreme care, especially while using a chainsaw.
FAQs
Should You Tighten The Chain Too Much?
The chain needs to be tight but not too tight for a saw to work right. The next is to make sure that the strain is significant. You can remove one or more drive connections from the guiding bars chain by pulling the chain down from the bottom. The connection should snap into place without having to be moved around.
What Exactly Does a Crooked Cut Mean?
It means that the chainsaw will not cut the wood accurately. One-sidedly larger teeth mean the chainsaw won’t be able to make straight cuts. An object like a stone, screw or even dirt becoming caught in the chain when its movement might lead to this problem.
On Which Angle Should You Sharpen Your Chain Saw?
The angle at which the edge is sharpened will often fall anywhere around 25 to 35 degrees; the thicker the material, the steeper the angle. As help in maintaining the right angle, we suggest that you make use of a sharpening grid or a file gauge. Both of these tools are available at most hardware stores.
How Come My Chainsaw Blade Becomes Dull So Quickly?
A chainsaw may get dull if it makes even one unintended touch with the floor or ground while operating. It is due to many small objects on the surface that come in contact with the saw blade. To prevent this from happening, you should not chop down trees that have been set on the ground.
Is It Ok To Work For A Longer Time On A Chainsaw?
A chain that is not in good condition will force you to work overtime on the saw. A deficiency of oil would lead the bars to degrade faster rapidly, which may induce a break in the chain and cause severe damage. Inadequate chain strain will break the link, which can result in significant injury.
Conclusion
Making an exact cut with a chainsaw requires regular maintenance. Possessing technological know-how to make the cuts suitable for you is also crucial.